化學成分 PTVS11VP1UTP-Q

作為一家積極進取的可持續發展公司，安世半導體已決定直接通過互聯網發布其產品組合的化學成分信息。藉由此信息，恩智浦可以向我們的客戶提供相關資料，以協助他們進行RoHS指令或無鉛狀態合規評估。客戶可以直接從一般產品數據庫檢索中獲取這些詳細的數據，這是安世半導體為半導體產業設下的一個行業標準。安世半導體產品符合歐盟RoHS指令、ELV和中國RoHS。詳細資料請見限用物質聲明。Restricted Substances Declaration.

12NC	OPN	Type No.	Package	State	MSL
934665624115	PTVS11VP1UTP-QX	PTVS11VP1UTP-Q	SOD128 (FlatPower)	RFS	1

REACH	Compliant with Regulation 1907/2006/EC (REACH). Contains REACH SVHC substance 7439-92-1 at 68175 ppm of the article. SCIP No. e69b8273-820f-4c43-8ec6-8b54a5b7d316.
EU RoHS	Compliant with Directive 2011/65/EU, amended by Directive 2015/863/EU, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ('RoHS 2 amended'); using exemption 7(a): 'Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).'.
CN RoHS	Compliant with Chinese ACPEIP (Administration on the Control of Pollution Caused by Electronic Information Products) (CN RoHS); using exemption 8.1: '高熔點焊料 (如鉛含量超過85%（重量百分比）的鉛基合金焊料）'.
ELV	Compliant with Directive 2000/53/EC, amended by Directive 2023/533, on end of life vehicles (ELV); using exemption 8(e): 'Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).'.
PFAS	Does not contain any intentionally added per- and polyfluoroalkyl substances (PFAS).
CA Proposition 65	Contains California Proposition 65 substance(s) [at the article level]: substance 1333-86-4: 1001 ppm; substance 7439-92-1: 68175 ppm;
IEC 62474	Contains IEC 62474 substance(s) [at the article level]: substance 1333-86-4: 1001 ppm; substance 7439-92-1: 68175 ppm;
Precious Metals	Contains precious metals [Ag, Au, Pd, Pt; at the article level]: substance 7440-22-4: 6895 ppm;
RHF Indicator	Contains EU RoHS-exempted lead and halogen-free according to Nexperia's halogen-free definition.

Material	Material Group	Substance	CAS No.	Mass (mg)	Material (%)	Product (%)
Die	Doped silicon	Silicon (Si)	7440-21-3	1.080000	100.000000	3.183962
		Die Total		1.080000	100.000000	3.183962

Clip	Copper alloy	Copper (Cu)	7440-50-8	6.841095	99.870000	20.168322
Clip	Copper alloy	Iron (Fe)	7439-89-6	0.006850	0.100000	0.020195
Clip	Copper alloy	Phosphorus (P)	7723-14-0	0.002055	0.030000	0.006058
		Clip Total		6.850000	100.000000	20.194575

Lead Frame	Copper alloy	Copper (Cu)	7440-50-8	11.633244	98.420000	34.296120
Lead Frame	Copper alloy	Iron (Fe)	7439-89-6	0.011820	0.100000	0.034847
Lead Frame	Copper alloy	Phosphorus (P)	7723-14-0	0.003546	0.030000	0.010454
		Base Alloy C19210 Total		11.648610	98.550000	34.341421
Lead Frame	Pure metal layer	Silver (Ag)	7440-22-4	0.171390	1.450000	0.505277
		Pre-Plating Total		0.171390	1.450000	0.505277
		Lead Frame Total		11.820000	100.000000	34.846698

Mould Compound	Filler	Silica fused	60676-86-0	8.037200	71.000000	23.694576
Mould Compound	Polymer	o-Cresol-epichlorohydrin-formaldehyde copolymer	29690-82-2	2.230040	19.700000	6.574410
Mould Compound	Polymer	Phenolic resin		1.018800	9.000000	3.003538
Mould Compound	Pigment	Carbon black	1333-86-4	0.033960	0.300000	0.100118
		Mould Compound Total		11.320000	100.000000	33.372642

Post-Plating	Tin solder	Tin (Sn)	7440-31-5	0.349966	99.990000	1.031739
Post-Plating	Impurity	Lead (Pb)	7439-92-1	0.000018	0.005000	0.000053
Post-Plating	Impurity	Antimony (Sb)	7440-36-0	0.000010	0.003000	0.000030
Post-Plating	Impurity	Bismuth (Bi)	7440-69-9	0.000003	0.001000	0.000009
Post-Plating	Impurity	Copper (Cu)	7440-50-8	0.000003	0.001000	0.000009
		Post-Plating Total		0.350000	100.000000	1.031840

Solder Paste	Lead alloy	Lead (Pb)	7439-92-1	2.312500	92.500000	6.817512
Solder Paste	Lead alloy	Tin (Sn)	7440-31-5	0.125000	5.000000	0.368514
Solder Paste	Lead alloy	Silver (Ag)	7440-22-4	0.062500	2.500000	0.184257
		Solder Paste Total		2.500000	100.000000	7.370283

		PTVS11VP1UTP-Q Total		33.920000		100.000000

Notes
Report created on 2025-09-01 09:33:44 CEST+0200

Disclaimer
All information in this document is furnished for exploratory or indicative purposes only. All information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Nexperia may make changes to information published in this document at any time and without notice. Minor deviations may occur in the products from different manufacturing locations. This document supersedes and replaces all information supplied prior to the publication hereof. Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents, or other industrial or intellectual property rights.

Disclaimer

All information in this document is furnished for exploratory or indicative purposes only. All information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Nexperia may make changes to information published in this document at any time and without notice. Minor deviations may occur in the products from different manufacturing locations. This document supersedes and replaces all information supplied prior to the publication hereof. Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents, or other industrial or intellectual property rights.

Pb-free Soldering		Pb Soldering		No. of Processing Cycles
PPT	MPPT	PPT	MPPT	No. of Processing Cycles
260 °C	40 s	235 °C	30 s	3

Notes
Report created on 2025-09-01 09:33:44 CEST+0200

Disclaimer
All information in this document is furnished for exploratory or indicative purposes only. All information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Nexperia may make changes to information published in this document at any time and without notice. Minor deviations may occur in the products from different manufacturing locations. This document supersedes and replaces all information supplied prior to the publication hereof. Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents, or other industrial or intellectual property rights.

Disclaimer

部件名稱 Material	有毒或有害物質和元素 (Toxic or hazardous substances and elements)
部件名稱 Material	鉛 (Pb)	鎘 (Cd)	汞 (Hg)	六價鉻 (Cr⁶⁺)	多溴聯苯 (PBB)	多溴二苯醚 (PBDE)
半導體芯片 (Die)	?	?	?	?	?	?
夾子 (Clip)	?	?	?	?	?	?
基底合金 (Base Alloy)	?	?	?	?	?	?
預鍍層 (Pre-Plating)	?	?	?	?	?	?
模封料 (Mould Compound)	?	?	?	?	?	?
后鍍層 (Post-Plating)	?	?	?	?	?	?
錫膏 (Solder Paste)	?	?	?	?	?	?

?	表示該有害物質在該部件所有均質材料中的含量均在 GB/T 26572 規定的限量要求以下 Indicates that said hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement of GB/T 26572.
?	表示該有害物質至少在該部件的某一均質材料中的含量超出 GB/T 26572 規定的限量要求 Indicates that said hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement of GB/T 26572.
	該半導體產品的環保使用期限（EFUP）為50年。 This semiconductor product has an environmental friendly use period (EFUP) of 50 years.

Notes
Report created on 2025-09-01 09:33:44 CEST+0200

Disclaimer
All information in this document is furnished for exploratory or indicative purposes only. All information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Nexperia may make changes to information published in this document at any time and without notice. Minor deviations may occur in the products from different manufacturing locations. This document supersedes and replaces all information supplied prior to the publication hereof. Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents, or other industrial or intellectual property rights.

Disclaimer

Restricted substances declaration

The many processes used to manufacture semiconductors are complex and delicate, and require a variety of specialized chemicals and materials. To protect our employees and the environment, we have several programs in place that regulate our use of hazardous chemicals or "substances of concern". In fact, we follow some of the toughest practical standards in the industry.

We carefully monitor our use of substances categorized as restricted, hazardous, or relevant, and have committed, as part of our near-term Sustainability Program, to achieving a 100% reduction of all restricted and hazardous substances that aren’t critical use. We track our usage of chemicals in our company-wide Chemical Management program, which registers and classifies the chemical substances we handle. Any use or emission of restricted or hazardous substances must be covered by internal dispensation, so we are searching for alternatives as quickly as possible.

The Nexperia List of Hazardous Substances in Products and Packaging specifies substances that are not permitted in materials, parts, semi-finished goods and products at levels above our established threshold to ensure that no Nexperia products put on the market contain any substances that are restricted by law or other regulations, including the European Union’s Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (commonly known as RoHS).

While most substances on this list are not permitted by law, a number of them are not permitted by Nexperia in view of upcoming legislation, their impact on the environment or on health & safety.

The Nexperia List of Hazardous Substances in Products and Packaging also contains a number of Restricted Substances. Use of these substances is allowed, but any use of these substances must be reported above the declaration threshold as specified in this list. Most substances are placed on this list because of health risks in their use and/or processing. Others are placed on this list because they limit recycling, because they are scarce or they have for instance a high environmental impact in mining.

欧美1区二区三区日韩色,AV天堂永久资源网,成人性无码不卡免费视频,国产69精品一区二区,青青青青青在线视频免费播放,女人国产香蕉久久精品亚洲,国产精品99久久久久久国产馆,国产精品自产拍在线观看,一区二区三区欧美在线看

所有產品

雙極性晶體管

二極管

ESD保護、TVS、信號調節

MOSFET

SiC MOSFETs

氮化鎵場效應晶體管(GaN FET)

絕緣柵雙極晶體管(IGBTs)

模擬和邏輯IC

汽車

所有應用

汽車

工業和電力

移動和可穿戴應用

計算和消費電子

Sub-systems: Power conversion topologies

子系統

參考設計

評估板

Interactive application notes

Advanced Support Tools

化學成分 PTVS11VP1UTP-Q

雙極性晶體管

二極管

ESD保護、TVS、濾波和信號調節ESD保護

MOSFET

氮化鎵場效應晶體管(GaN FET)

絕緣柵雙極晶體管(IGBTs)

模擬和邏輯IC

汽車應用認證產品(AEC-Q100/Q101)

化學成分 PTVS11VP1UTP-Q